Astro Design PORTABLE SIGNAL GENERATOR PROGRAMMING SOFTWARE SP-8848 - Manual (Page 116)

108
Binary editor
Binary data setting screen
No. Item Details
SET button This is pressed to convert the edited binary data into the caption data.
Length The number set here becomes the effective character numbers. For example, if 32
letters data is input, but the “5” is input in the “length” item, the effective character
data is from 1 to 5.
Control data The control data is set in the pull-down menu. If the setting data is from 11h, 12h,
13h, 19h,1Ah, and 1Bh,the control data is applied to the first byte of two bytes letters.
If control data is present, one character data will consist of 2 bytes (= 1 byte for the
control data and 1 byte for the character data value in the edit box on the right.)
The control data which can be setting by the caption style set up differs.
CC1 and CC3 : 11h, 12h, 13h
CC2 and CC4 : 19h, 1Ah, 1Bh
Character data Character code is set in an edit box part. If one byte letter does not have control
data, one edit box consists one character. The control data of one byte letter
appears as “--".