Astro Design PORTABLE SIGNAL GENERATOR PROGRAMMING SOFTWARE SP-8848 - Manual (Page 84)

2.11. Monitoring and changing the IP/Gateway address
This section describes how to monitor the statuses of the VGs which have been connected
using a LAN communication setup. It also explains how to change the IP addresses of the
connected VGs.
2.11.1. Startup method
Click the [Monitor] button of "VGBase" to start up the "Monitor."
2.11.2. Window screen and description
Monitoring
screen IP Change
Monitoring screen
The statuses of the connected VGs are displayed here.
IP Charge
When this is clicked, the "IP change" dialog box appears.
76