Astro Design PORTABLE SIGNAL GENERATOR PROGRAMMING SOFTWARE SP-8848 - Manual (Page 18)

(3) The "Layout Info Setting" (layout data setting) dialog box for setting the data at startup appears. If layout data is to be
used, select [Use Layout File], and click the [OK] button. Otherwise, select [No Info], and click the [OK] button. If the
no data layout will be used, "VGBase" is started up here.
(4) When the layout data is going to be used, the "Load File" file selection dialog box appears. (It does not appear when
the layout data is not going to be used.) Select the "Sample.lot" file in the Data directory (default:
"C:¥Astro¥SP-8848¥Data"), and click the [OK] button. (When a new file is to be created, enter its filename in the [File
Name] box.)
(5) The sample layout data is now loaded into "VGBase" and "VGBase" is started up.
In order to perform the interface and other settings, the configuration settings must be
performed once when the VG is started up. (See "Configuration settings" in Section 3-3.)
10