GW Instek PSU-Series Programming User Manual - Manual (Page 58)

PSU Programming Manual
58
<NR1> integers 0, 1, 2, 3
<NR2> decimal
numbers 0.1, 3.14, 8.5
<NR3> floating point 4.5e-1, 8.25e+1
<NRf> any of NR1, 2, 3 1, 1.5, 4.5e-1
<block data> Definitive length arbitrary block
data. A single decimal digit
followed by data. The decimal
digit specifies how many 8-bit
data bytes follow.
Message
Terminator
LF Line feed code
Command List
Display
Commands
:DISPlay:MENU[:NAME] ................................................... 62
:DISPlay[:WINDow]:TEXT:CLEar .................................... 62
:DISPlay[:WINDow]:TEXT[:DATA] ................................. 63
:DISPlay:BLINk ..................................................................... 63
Initiate
Commands
:INITiate:CONTinuous[:TRANsient] ................................ 64
:INITiate[:IMMediate]:NAME ............................................ 64
:INITiate[:IMMediate][:TRANsient] ................................... 65
Measure
Commands
:MEASure[:SCALar]:ALL[:DC] ........................................... 66
:MEASure[:SCALar]:CURRent[:DC] .................................. 66
:MEASure[:SCALar]:VOLTage[:DC] ................................. 66
:MEASure[:SCALar]:POWer[:DC] ...................................... 67