GW Instek PSU-Series Programming User Manual - Manual (Page 85)

REMOTE CONTROL
85
[:SOURce]:VOLTage[0]:PROTection[:LEVel]
Set
Query
Description Sets or queries the overvoltage protection level.
Syntax [:SOURce]:VOLTage[0]:PROTection[:LEVel]
{<NR2>(V)|MINimum|MAXimum}
Query Syntax [:SOURce]:VOLTage[0]:PROTection[:LEVel]?
Parameter/Return <NR2>
Minimum: Depends on the unit type:
if Vrated * 0.1 > 5V, then Minimum = 5V,
else Minimum = Vrated * 0.1
Maximum: Vrated * 1.1
MIN Minimum OVP level
MAX Maximum OVP level
Example SOUR:VOLT:PROT:LEV MAX
Sets the OVP level to its maximum.
[:SOURce]:VOLTage[0]:PROTection:TRIPped
Set
Query
Description Sets or queries the overvoltage protection level.
Query Syntax [:SOURce]:VOLTage[0]:PROTection:TRIPped?
Return parameter <bool>
0 Protection not tripped
1 Protection tripped
Example SOUR:VOLT:PROT:TRIP?
>0
Indicates that the OVP protection has not been
tripped.