GW Instek PSU-Series Programming User Manual - Manual (Page 73)

REMOTE CONTROL
73
:STATus:OPERation:ENABle
Set
Query
Description Sets or queries the bit sum of the Operation Status
Enable register.
Syntax
Query Syntax :STATus:OPERation:ENABle <NR1>
:STATus:OPERation:ENABle?
Parameter <NR1> 0~32767
Return parameter <NR1> 0~32767
:STATus:OPERation:PTRansition
Set
Query
Description Sets or queries the bit sum of the positive
transition filter of the Operation Status register.
Syntax :STATus:OPERation:PTRansition <NR1>
:STATus:OPERation:PTRansition?
Parameter <NR1> 0~32767
Return parameter <NR1> 0~32767
:STATus:OPERation:NTRansition
Set
Query
Description Sets or queries the bit sum of the negative
transition filter of the Operation Status register.
Syntax
Query Syntax :STATus:OPERation:NTRansition <NR1>
:STATus:OPERation:NTRansition?
Parameter <NR1> 0~32767
Return parameter <NR1> 0~32767
:STATus:QUEStionable[:EVENt]
Query
Description Queries the bit sum of the Questionable Status
Event register. This query will also clear the
contents of the register.
Query Syntax :STATus:QUEStionable[:EVENt]?
Return parameter <NR1> 0~32767