GW Instek APS-1102 User Manual - Manual (Page 130)

5.1 Screen Configuration
APS-1102 Programmable AC/DC Power Source 5-4
The following information is displayed in various parts of the screen.
A: Status window:
This window shows the status of various devices.
B: Message box: When an error has occurred, a message box appears near the bottom of the
status window, and the cause is displayed. The message box is closed
automatically after 1.5 seconds. It is also used to indicate an overload, as
well as the progress of a sequence.
C: Measured value window: This window displays measured values.
When measuring harmonic current, the data for both C and D is shown in
this window.
D: Menu window: This window is used to enter settings.
E: Message display window: A warning message is displayed in this message window whenever there is
an error that requires confirmation by the user. The displayed information
remains until the ENTER key has been pressed.