GW Instek APS-1102 User Manual - Manual (Page 170)

5.6 System Menu
APS-1102 Programmable AC/DC Power Source 5-44
5.6.7 External control input enable/disable setting
External control input can be set as enabled or disabled. However, the APS-1102 status will be output
even when external control input is set as disabled.
See “4.5 Control Using External Control I/O Connector”, for details of external control
input.
 Operation steps
1. Press the or key to move the cursor to “EXT CONTROL”.
ENTER CANCEL
Cursor
2. Press the
ENTER
key to display the selection box.
ENTER CANCEL
Selection box
3. Press the or key to move the cursor to “ENABLE” or “DISABLE”.
ENTER CANCEL
4. Press the
ENTER
key to complete the setting. Press the
CANCEL
key to cancel the setting.