GW Instek APS-1102A User Manual - Manual (Page 207)

6 REMOTE INTERFACE
APS-1102A 6-23

[SOURce:]SEQuence:CSTep?
This returns the step number being executed. The response ranges from

1 and 1 to 255.

1 is
returned in the idle mode.
Syntax: [SOURce:]SEQuence:CSTep?
Parameters: None
Query example: SEQ:CST?
Response format: <NR1>
Response example: 2

[SOURce:]SEQuence:LEN?
This returns the maximum number of sequence steps. 255 is always returned.
Syntax: [SOURce:]SEQuence:LEN?
Parameters: None
Query example: SEQ:LEN?
Response format: <NR1>
Response example: 255

[SOURce:]SEQuence:COUNt?
This returns the jump times of the step specified by SEQ:STEP. Response range of the number of
the jump times is -1 to 999. In the idle mode,

1 is returned.
Syntax: [SOURce:]SEQuence:COUNt?
Parameters: None
Query example: SEQ:COUN?
Response format: <NR1>
Response example: 2