GW Instek APS-1102A User Manual - Manual (Page 55)

3 PANEL AND BASIC OPERATIONS
APS-1102A 3-21
3.4.3 Setting output voltage range
Select 100 V range or 200 V range. The output voltage range cannot be changed while output is on.
The setting range varies according to the output voltage range.
Table3-8. List of Setting Ranges for Various Output Voltage Range
Setting
Setting Range
100 V range 200 V range Unit
DC voltage

220.0 to +220.0

440.0 to +440.0 V
AC voltage
Wave-
form SIN/SQU 0.0 to 155.0 0.0 to 310.0 Vrms
ARB1 to 16 0.0 to 440.0 0.0 to 880.0 Vp-p
Peak current limiter (positive) +10.0 to +42.0 +5.0 to +21.0 A
Peak current limiter (negative)

42.0 to

10.0

21.0 to

5.0 A
RMS current limiter 1.0 to 10.5 1.0 to 5.3 A
Positive voltage setting limit +0.1 to +220.0 +0.1 to +440.0 V
Negative voltage setting limit

220.0 to

0.1

440.0 to

0.1 V
External input gain 0.0 to 220.0 0.0 to 440.0 times

Operation steps
To set the output voltage range, select in the SET menu.
1. Press the or key to move the cursor to the icon.
ENTER CANCEL
Cursor