GW Instek APS-1102A User Manual - Manual (Page 57)

3 PANEL AND BASIC OPERATIONS
APS-1102A 3-23
3.4.4 Setting waveform
The APS-1102A allows to select a sine wave, square wave, or arbitrary waveform (16 types in all) as the
waveform to be output, by using the control panel. Arbitrary waveforms are generated using data
transfers via the USB interface.
See “4.6 Output of Arbitrary Waveforms”, for details of arbitrary waveforms.
Table3-9 lists the waveforms that can be selected.
Table3-9. Waveform List
As Shown in Operation Panel Type
SIN Sine wave
SQU Square wave
ARB1 to ARB16 Arbitrary waveform (16 types)

Operation steps
To select a waveform, select in the SET menu.
1. Press the or key to move the cursor to the icon.
ENTER CANCEL
Cursor
2. Press the
EN TER
key to display the selection box.
ENTER CANCEL
Selection box