GW Instek APS-1102A User Manual - Manual (Page 231)

6 REMOTE INTERFACE
APS-1102A 6-47
 
RST
This resets the device to its factory settings. However, reset cannot be executed when output is on.
([1, “Invalid with output on”] error occurs.)
Syntax:

RST
Parameters: None
Command example:

RST
Response format: None
Response example: None
 
SAV
This stores the current status information in memory. The memory storage ranges from 1 to 30.
Syntax:

SAV<NR1>
Parameters: 1 to 30
Command example:

SAV 1
Response format: None
Response example: None
 
SRE
This sets the service request enable register. The setting ranges from 0 to 178.
Syntax:

SRE<NR1>
Parameters: 0 to 178
Command example:

SRE 178
Query example:

SRE?
Response format: <NR1>
Response example: 178
 
STB?
This returns the status byte register value. The response ranges from 0 to 178.
Syntax:

STB?
Parameters: None
Query example:

STB?
Response format: <NR1>
Response example: 2