GW Instek GPT-9900 series User Manual - Manual (Page 127)

REMOTE CONTROL
127
FUNCtion:TEST
Set
Query
Description Turns the currently selected test (output) on or off.
When HOLD is displayed on the screen during
AUTO tests, use the FUNCtion:TEST command to
move on to the next step.
Setting the FUNCtion:TEST command to OFF at
the end of a test will also temporarily turn the
PASS/FAIL buzzer sound off.
Syntax
Query Syntax FUNCtion:TEST {ON|OFF}
FUNCtion:TEST?
Parameter ON Turns the test on.
OFF Turns the test off.
Return parameter TEST ON Test is on.
TEST OFF Test is off.
Example FUNC:TEST ON
Turns the output on.
MEASure<x>
Query
Description Returns the test parameters & results of the tester
in either MANU or AUTO mode.
MANU mode: Returns the test parameters &
results of a MANU test.
AUTO mode: Returns the test parameters & results
of the selected step (1-16) of the AUTO test.
Return parameters: function, judgment/status, test
voltage, test current/resistance, test time (time of
completed test) or ramp time (elapsed time of test
that has not been completed.
Query Syntax MEASure<x>?