Caution – HT instruments PQA824 User Manual

Page 21

Advertising
background image

PQA400 - PQA823 - PQA824

EN - 20

12/09/2006 – 16:55:10

FLICKER – Page x/y

V1N

V2N

V3N

Pst1’

0.0

0.0

0.0

Pst

0.0

0.0

0.0

Pst max

0.0

0.0

0.0

Plt

0.0

0.0

0.0

Plt max

0.0

0.0

0.0

Recording Time: 00h – 00min

PAGE

SCOPE

HARM

VECTORS

PARAMETERS CAPTION:
Pst1’

 Short term severity after 1 minute

Pst

 Short term severity

Pstmax

 Maximum short term severity

Plt

 Long term severity

Pltmax

 Maximum long term severity

Recording Time

 real time duration of recording

expressed in HH:MM

Fig. 24: Page of Flicker values

25/01/2013 – 16:55:10

TOT. ENERGY CONSUMPTION – Page x/y

Eact =

0

kWh

Ppeak =

0

kW

Date Ppeak

:

-- / -- / -- 00:00:00

Start rec.

:

-- / -- / -- 00:00:00

Stop rec.

:

-- / -- / -- 00:00:00

Rec. Time

:

- - -

Int. Per.

:

- - -

Rec: - -

PAGE

SCOPE

HARM

VECTORS

PARAMETERS CAPTION:
Eact

 Total active energy consumed when starting

recording.
Ppeak

 Maximum peak of consumed active power.

Date Ppeak

 Date and time in which the peak occurred.

Start rec.

 Date when recording was started.

Stop rec.

 Date when recording was stopped.

Rec. Time

 Time elapsed from Rec Start.

Int. Per.

 Value of the set integration period.

Rec

 Number of the recording in progress

Fig. 25: Consumed energy page


CAUTION

The Total Consumed Energy page is shown only if the instrument has been
set for the Recording of the General Parameter Total “Active Power &
Energy” (see § 5.4.6.1). Values will be shown only during or at the end of a
recording and zeroed upon starting a new recording or when the instrument
is switched off

25/01/2013 – 16:55:10

TOT. ENERGY PRODUCTION – Page x/y

Eact =

0

kWh

Ppeak =

0

kW

Date Ppeak

:

-- / -- / -- 00:00:00

Start rec.

:

-- / -- / -- 00:00:00

Stop rec.

:

-- / -- / -- 00:00:00

Rec Time

:

- - -

Int. Per.

:

- - -

Rec: - -

PAGE

SCOPE

HARM

VECTORS

PARAMETERS CAPTION:
Eact

 Total active energy produced when starting

recording.
Ppeak

 Maximum peak of produced active power.

Date Ppeak

 Date and time in which the peak occurred.

Start rec.

 Date when recording was started.

Stop rec.

 Date when recording was stopped.

Rec Time

 Time elapsed from Rec Start.

Int. Per.

 Value of the set integration period.

Rec

 Number of the recording in progress

Fig. 26: Producted energy page


CAUTION

The Total Produced Energy page is shown only if recording parameter “Co-
generation” has been set in the instrument (see § 5.4.5) and if general
parameter Total “Active Power & Energy” has been selected (see § 5.4.6.1).
Values will be shown only during or at the end of a recording and zeroed
upon starting a new recording or when the instrument is switched off.

Advertising
This manual is related to the following products: