HT instruments PQA824 - Manual (Page 53)

PQA400 - PQA823 - PQA824
EN - 52
Press SAVE or ENTER keys (or the smart icon ) to save each selection and confirm by
“Ok”. The main screen of Fig. 89 is shown by meter at the end of the operation.
Press ESC key (or the smart icon ) to quit without saving and back to previous screens.
12/09/2006 – 16:55:10
RECORDING SETTINGS

-  General Parameters
 Frequency
-  Voltages
 Phase1-Phase2
 Phase2-Phase3
 Phase3-Phase1 
22/251 Parameters – Autonomy: 38d 16h
CLP/EXP PREDEF. SEL MODIFY
Fig. 98: General Parameters sub-level - Three phase 3-wire ARON system
The below parameters can be selected for recording in Three phase 3-wire ARON
systems:
Parameters Description
Frequency Frequency of phases L1, L2, L3
Voltages TRMS voltages L1-L2, L2-L3, L3-L1
Currents TRMS currents L1, L2, L3
Active Power & Energy Active power and energy L1-L2, L3-L2, Total
Reactive Power & Energy
Reactive (inductive or capacitive) power and energy
L1-L2, L3-L2, Total
Apparent Power & Energy Apparent power and energy L1-L2, L3-L2, Total
Power Factor Power factor L1-L2, L3-L2, Total
CosPhi
Power factor referred to fundamental of voltage and
current L1-L2, L3-L2, Total
Table 5: Selectable parameters for Three phase 3-wire ARON system
Press SAVE or ENTER keys (or the smart icon ) to save each selection and confirm by
“Ok”. The main screen of Fig. 89 is shown by meter at the end of the operation.
Press ESC key (or the smart icon ) to quit without saving and back to previous screens.