In-Situ Communication Device Kit for the Aqua TROLL 400 and RDO PRO Probe User Manual
Instruction sheet, Communication device kit, Kit contents
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- 1 Kit Contents
- 2 Install and Open the Software
- 3 Connect the Instrument to a Computer
- 4 View Live Readings
- 5 Adjust Communications Outputs
- 6 Modbus Setup
- 7 SDI-12 Setup
- 8 Sensor Setup Tab
- 9 Temperature Sensor
- 10 RDO Sensor
- 11 RDO Sensor Calibration
- 12 Conductivity Sensor Calibration
- 13 Pressure/Level
- 14 pH/ORP Sensor Calibration
- 15 Diagnostics and Factory Reset