Jenway 3510 - Manual (Page 23)

3.11 Results storage and display
To store the current displayed result press the STO key. The instrument display will momentarily
show STORED on the secondary display. The memory location will be given on the status display.
Up to 32 results can be stored. Each result will be stored in the next available memory location.
The instrument will store: Primary pH or mV readings
Temperature readings and the unit of measurement (°C or °F)
MAN if manual temperature measurement is used
Endpoint symbol
REL if relative mV is selected
Selecting the RESULTS menu displays the reading stored at the displayed memory location.
The Up arrow increments the memory index, the Down arrow decrements the memory index.
The Left arrow exits to the main measurement display.
The Right arrow and STO keys do not function.
CAL/CLR deletes the current memory location. The secondary display scrolls DELETED.
Holding the CAL/CLR key until after DELETED is displayed on the screen will delete all readings.
The secondary display will then scroll ALL RECORDS DELETED.
If no readings have been stored, the secondary display will show EMPTY.
To exit this mode press the ESC key.
If the memory is full the secondary display will show FULL.
351 050/REV B/09-06 20