KANOMAX 6036 Multi-function thermal anemometer User Manual - Manual (Page 14)

13
Battery Level Indicator
Check the “Battery Level Indicator” to
confirm the remaining battery level. The
battery consumption rate largely
depends on the measured air velocity.
When the batteries need to be replaced
(or recharged), the indicator will start
blinking.
 When using a charging battery, the battery level may be
indicated as low even right after recharging because of its low
nominal voltage (1.2V).
 The screen may freeze if high velocity is measured when the
battery level indicator is blinking.
The indicator changes as indicated below according to the
remaining battery level:
- Locked Status -
When is displayed, all functions of the
instrument will be locked. The current measurement
will be cancelled and data will NOT be saved. To release
the lock, turn off the power and replace the batteries.
Blinks
Batteries must
be replaced