KANOMAX 6036 Multi-function thermal anemometer User Manual - Manual (Page 26)

25
Analog Output
Analog output is limited to the output of air
velocity in the Air Velocity / Air Temperature
Mode.
1. Data update interval ……0.1sec
2. Load impedance………..…5KΩ and above
3. Output voltage………….DC 0~3V (0~30m/s)
4. Polarity of output voltage…
USB Serial Communication
For serial communication, the USB cable must be connected to the
serial communication terminal located at the side of the instrument.
< Requirements >
● Computer
● USB Cable
● Measurement Software
1.PC-LINK Software:
For transferring stored data to the PC.
2.Data Acquisition Software:
For transferring real time data to the PC.
< Connecting the Instrument to a Computer >
1. Turn off the instrument.
2. Connect the instrument to a computer with the USB
communication cable.
3. Turn the instrument on.
4. Confirm that the instrument is in normal measurement mode.
* Refer to the digital operation manual provided with the software CD-ROM
for operation procedures.
Analog Output
Terminal
Serial Communication
■ Serial
communication is
only available on
MODEL6036
■ Analog output is
available on
MODEL 6035-A0/
6035-C0/6036-A0/
6036-C0.
Terminal