KANOMAX 6036 Multi-function thermal anemometer User Manual User Manual
Page 20
19
●
Data Storage and Statistical
Calculation
Press the
key to execute the
statistical calculation (Average,
Maximum and Minimum) for the group
of data records stored in the
temporary memory.
Display will switch in the sequence
shown as follows (AVG MAXMIN)
as you press the
key.
●
Storing the Calculated Results
To store the calculated results, press
the
key while average, maximum
or minimum value is displayed. The
display will then return to the original
measurement mode and the
temporary memory will be cleared.
●
To Clear the Data Group
To clear the data group without saving,
press and hold the
key while
average, maximum or minimum value
is displayed. The display will return to
the original measurement mode.
*
Data records stored in the temporary
memory and the calculation results will
be cleared.
■
Data storage
function is
available on
MODEL6036
■
On
MODEL6035,
the screen will
return to the
measurement
mode you
were in by
pressing
key after
calculation