KROHNE OPTIFLEX 1300C EN - Manual (Page 14)

2
DEVICE DESCRIPTION
14
OPTIFLEX 1300 C
www.krohne.com 03/2014 - 4000172306 - HB OPTIFLEX 1300 R07 en
2.2 Device description
The TDR level transmitter is designed to measure the distance, level, interface, mass and
volume of liquids, pastes, slurries, granulates and powders.
TDR level transmitters use a probe to guide a signal to the surface of the measured product. The
device has a large choice of probes. Thus, it can measure most products in difficult conditions.
For more data, refer to
Technical data on page 127.
The device has a set-up wizard, fully-potted electronic sub-assemblies and online help
functions. You usually will not need this document to install, set up and operate the device.
You can order these accessories:
• Stainless steel weather protection.
• RS232 / HART
®
converter (VIATOR).
• USB / HART
®
converter (VIATOR).
• ESD protection (30 kV).
• Metaglas
®
dual process sealing system for dangerous products.
INFORMATION!
For more data on accessories, refer to List of accessories on page 182
.