KROHNE OPTIFLEX 1300C EN - Manual (Page 40)

3
INSTALLATION
40
OPTIFLEX 1300 C
www.krohne.com 03/2014 - 4000172306 - HB OPTIFLEX 1300 R07 en
3.8.2 How to assemble the single rod probe (segmented probe)
INFORMATION!
This procedure is for devices with single rod probes that are segmented.
Figure 3-30: Equipment needed to assemble the single rod probe (segmented)
1 Converter and process connection
2 Bottom (quantity: 1) segment of the rod probe
3 Top and middle (if more than one) segments of the rod probe
4 Tools: two 8 mm open-end wrenches (not supplied)
5 Lock nuts (2 lock nuts per segment)
6 Union nut (1 union nut per segment)