KROHNE CORIMASS G-MFM 4085 EN - Manual (Page 75)

75
5.14.5 Location
It is possible to program each unit with an individual identification number. This is especially
useful if the 'SMART' option is being used. To set the location number :
Begin from measuring mode
Use the
↑
key to change the character under the cursor. The sequence is :
A to Z, 0 to 9, +, -, *, /, =, SPACE.
Use the
→
key to move the cursor to the next character.
Press
↵
key when completed.
Key Display
line 1
line 2
→↑↑
Fct. (3).0 INSTALL
→
7x
↑
Fct. 3.(8).0 USER DATA
→↑↑↑
Fct. 3.8.(4) LOCATION
→
(M)FC 085
Factory Setting