KROHNE CORIMASS G-MFM 4085 EN - Manual (Page 95)

95
9. Order numbers
Standard Converters Order Number
100 - 240 V AC HART CE 2.10710100
21 - 48 V AC HART CE 2.10710340
24 V DC HART CE 2.10725100
100 - 240 V AC Multi I/O HART CE 2.11239020
21 - 48 V AC Multi I/O HART CE 2.11239040
24 V DC Multi I/O HART CE 2.11239060
Ex Converters Order Number
100 - 240 V AC HART CE 2.10724100
21 - 48 V AC HART CE 2.10724340
24 V DC HART CE 2.10726100
100 - 240 V AC Multi I/O HART CE 2.11239080
21 - 48 V AC Multi I/O HART CE 2.11239100
24 V DC Multi I/O HART CE 2.11239120
Power Supply - Fuse F9
Value Order number Fuse type
160 mA T 5.07379.00 5
×
20 mm G-Fuse
315 mA T 5.05804.00 Switching capacity
800 mA T 5.08085.00 1500 A
1.6 A T 5.07823.00
1.25 A T 5.09080.00 TR 5, switching
capacity 35 A
Fuse Value
F 10 +5 V Analog voltage 500 mA T
F 11 Negative Analog voltage 100 mA T
F 12 Input /output functions 160 mA T
These fuses F10, F11 & 12 are soldered into the power supply and are essential to ensure the
system complies with the European Union’s low voltage directive. Any attempt to replace these
fuses will invalidate the waranty and should not be attempted by the customer. These fuses will
only blow in the event of:
−
Customer abuse, i.e. removing the display with the power still on or incorrect use of outputs.
−
Hardware fault
Spares and accessories Order number
1. Special spanner for lid 3.07421.01
2. Lid ”O”ring seal
3. RS 232 Adaptor and Config. Software 2.10209.00
4. Magnet 2.07053.00