KROHNE BM 70 M - Manual (Page 34)

34 BM 70 M
8.4 Table of settable functions (Versions 4.04 – 4.06)
Function (Fct.) Enter range Default
value Description
1.0 OPERATION
1.1 DISPLAY
LEVEL
DISTANCE
CONVERSION 1.1.1 FCT.DISP Options
REFLECTION
LEVEL Select function of
display
(value to be displayed).
m
cm
mm
inch
Ft
PERCENT 1.1.2 UNIT.LENGTH Options
BARGRAPH
Meter [m] Select unit for value of
length to be displayed
(level/distance).
m3
l
US Gal
GB Gal
Ft3
bbl
PERCENT
BARGRAPH 1.1.3 UNIT. CONV Options
USER UNIT
Cubic meter
[m3] Select unit for
conversion value to be
displayed ("volume
table").
2.0 TEST
2.1 HARDWARE
2.1.1 MASTER Special function Tests the hardware of
the master.
2.1.2 DISPLAY Special function Tests the hardware of
the display.
Options Module DIS 2.1.3 STATUS
Module MW
Displays ID-Number
and Status Bytes
2.2 CUR.OUTP.I
2.2.1 VALUE I Value display Displays the actual
value of the current
output.
Options 2 mA
4 mA
6 mA
8 mA
10 mA
12 mA
14 mA
16 mA
18 mA
20 mA
2.2.2 TEST I
22 mA
2 mA Output of selected
value to the current
output.
IMPORTANT !!! With
safety inquiry because
of direct access to the
current output !!!
(Exi = min. 3.6 mA)