KROHNE BM 70 M - Manual (Page 77)

BM 70 M 77
12 External standards, codes and directives
DIN V 19259: 1996-10 Documentation of devices, Data types with classification scheme for measuring
equipment with analogue or digital output for industrial process measurement
[in German]
VDI/VDE 3519 (part 2): 1994-12. Level measurement of liquids and solids (bulk solids) [in German]
DIN VDE 0165: 1991-02. Installation of electrical apparatus in hazardous areas [in German]
DIN EN 50014: 2000-02. Electrical apparatus for potentially explosive atmospheres, General
requirements
DIN EN 50018: 1995-03. Electrical apparatus for potentially explosive atmospheres, Flameproof
enclosure "d"
DIN EN 50019: 1996-03. Electrical apparatus for potentially explosive atmospheres, Increased safety "e"
DIN EN 50020: 1996-04 Electrical apparatus for potentially explosive atmospheres, Intrinsic safety "i"
DIN EN 50284: 2000-02. Special requirements for construction, test and marking of electrical apparatus
of equipment group II, category 1 G
DIN EN 50081-1 (VDE 0839 part
81-1): 1993-03. Electromagnetic compatibility (EMC), Generic emission standard, Part 1:
Residential, commercial and light industry
EN 50082-2: 1995-03. Electromagnetic compatibility, Generic immunity standard, Part 2: Industrial
environment
NE 21 NAMUR recommendation „Electromagnetic compatibility (EMC) of industrial process
and laboratory control equipment“, 1998-08
DIN EN 61010-1 (VDE 0411 part
1):1993-04. Safety requirements for electrical equipment for measurement, control and
laboratory use, general requirements
pr EN 50178 / DIN EN 50178
1994-08 Electronic equipment for use in power installations
Directive 89/336/EWG (CE marking)
DIN EN 60068-2 (IEC 68-2):
1995-03
Environmental tests
DIN IEC 68-2-6: 1990-06 Electrical engineering, Basic environmental test procedures
DIN EN 60654, part 1 (IEC 654-
1): 1994-02 Industrial process measurement and control equipment; Operating conditions;
Climatic Conditions
DIN EN 60529: 2000-09 Degrees of protection by enclosures (IP Code)
DIN 2501: 1972-02 Flanges - Fitting dimensions [in German]
DIN 2527: 1972-04 Blind flanges [in German]
ANSI B 16.5: 1988 Pipe Flanges and Flanged Fittings
DIN 11851: 1998-11 Fittings for food, chemical and pharmaceutical industry - Stainless steel
screwed pipe connections - Design for rolling in and welding-on
DIN EN 10088, Teil 1: 1995-08 Stainless steels - Catalogue of the stainless steels
DIN 55990: 1979-12 Verification of paints and similar coating materials; Powder mould coatings
[in German]
HUG-3: HART ® FSK Physical Layer Specification Rev. 7.2: 1993-05
13 Quality assurance
KROHNE Messtechnik GmbH & Co. KG is certified to:
• DIN ISO 9001 / EN 29001 and
• KTA 1401 QSP 4A (nuclear power engineering)