KYORITSU 6300 Quick Manual - Manual (Page 15)

Safety first!
Turning on the instrument
Basic setting
Wiring
Confirmation of
instantaneous value
Setting for Integration
measurement
Instantaneous value
measurement
Wh range
6. Integration value measurement: Wh range
(Section 7)
● Measurement flow chart
● Items displayed on Wh range
Displayed parameters Unit
Active electrical
energy (consumption)
WP : Total active electrical energy
WP1/WP2/WP3 : Active electrical energy per phase
Wh
Apparent electrical
energy (consumption)
WS : Total apparent electrical energy
WS1/WS2/WS3 : Apparent electrical energy per phase
VAh
Elapsed time of
integration
TIME : Hour; Min.; Sec.
Hour; Min.
Hour
-
SET UP range
“Setting 09” Integration interval
“Setting 10” Integration start time & date
(to start measurement at set time & date)
“Setting 11” Integration stop time & date
(to stop measurement at set time & date)
“Setting 12” Reset of integration value
W range
SET UP range
“ Setting 01” Wiring
“ Setting 02” Voltage range
“ Setting 03” Current range
“ Setting 04” Clamp sensor
“ Setting 05” VT ratio (if necessary)
“ Setting 06” CT ratio (if necessary)
− 13 −