KYORITSU 6300 Quick Manual - Manual (Page 6)

● Marks displayed on the LCD (2-1)
< All marks to be displayed on the LCD>
< Marks indicate the measurement status or functions >
Mark Measurement status or function
Displayed when the keys are locked.
Displayed when voltage exceeds a certain value.
Displayed when current exceeds a certain value.
Displayed when instrument is operating with AC power supply.
Displayed when instrument if operating with batteries.
Displayed when data hold function is activated.
Displayed during integration, Flashes during stand-by mode.
Displayed during demand, Flashes during stand-by mode.
Displayed when the capacity of CF card or internal memory is full.
Displayed while saving data in CF card.
Displayed when opening/ closing a file at measurement.
Displayed when saving data.
Displayed when a file exists in the internal memory.
Displayed when VT ratio is set to at a value other than 1.
Displayed when CT ratio is set to at a value other than 1.
Unit
Phase
number
Voltage range Wiring
Current range
− 4 −