KYORITSU 6300 Quick Manual - Manual (Page 7)

3. Setting: SET UP range (Section 4)
3.1 List of setting items
(4-1)
Each Setting Item No./ Setting item Mark Setting
01 Wiring
-
1P2W(1ch)/ 1P2W(2ch)/
1P2W(3ch)/ 1P3W/ 3P3W /3P4W
02 Voltage range
-
150/ 300/ 600V
03 Current range
-
Range (
04
Clamp sensor)
5/ 10/ 20/ 50A : (50A)
10/ 20/ 50/ 100A : (100A)
20/ 50/ 100/ 200A : (200A)
50/ 100/ 200/ 500A : (500A)
100/ 200/ 500/ 1000A : (1000A)
1000/ 3000A : (3000A)
04 Clamp sensor 50/ 100/ 200/ 500/ 1000/ 3000A
05 VT ratio 1 ~ 10000
Basic
setting
06 CT ratio 1.00 ~ 10000.0
07 Time (*1)
Year : Month : Day,
Hour : Minute : Second
Other
settings
08 Buzzer
on (sound)
oFF (not sound)
09 Integration interval
1/ 2/ 5/ 10/ 15/ 20/ 30 sec.
1/ 2/ 5/ 10/ 15/ 20/ 30 min., 1 hour
10 Integration start
time & date
Year : Month : Day,
Hour : Minute : Second
11 Integration stop
time & date
Year : Month : Day,
Hour : Minute : Second
Settings
only for
integration
measurement
12 Reset of
integration value
on (reset)
oFF (not reset)
13 Demand Interval
1/ 2/ 5/ 10/ 15/ 20/ 30 sec.
1/ 2/ 5/ 10/ 15/ 20/ 30 min., 1 hour
14 Demand start
time & date
Year : Month : Day,
Hour : Minute : Second
15 Demand stop
time & date
Year : Month : Day,
Hour : Minute : Second
16 Demand target
value
0.1W ~ 999.9GW
17 Demand inspection
cycle
Can select a time from any three
of preceding time as demand
interval.
<e.g.>
Interval =30min. →10/ 15/ 20 min.
Settings
only for
demand
measurement
18 Reset of
demand value
on (reset)
oFF (not reset)
− 5 −