001 v, 000 ma, Using measure modes – Martel Electronics PSC4010 User Manual
Page 12: Volts in menu, Light, Ma in -25.00% menu, 1 measuring volts, millivolts and frequency, 2 measuring ma
10
3. Using Measure Modes
3.1 Measuring volts, millivolts and frequency
The calibrator can measure volts or frequency on these jacks. To make the desired
measurements, follow these steps:
1.
Select the [CONFIG] option from the main menu.
2.
Select the desired parameter for measurement.
3.
Connect leads as shown in Figure 5.
Figure 5. Measuring Volts and Frequency with Input/Output Terminals
3.2 Measuring mA
To measure mA follow these steps:
1.
Select the [CONFIG] option from the main menu.
2.
Choose [mA] from the primary parameters.
3.
Make sure the input/output control is set to IN.
4.
Connect leads as shown in Figure 6.
Figure 6. Measuring mA with Input/Output Terminals
VOLTS IN
MENU
-0.001 V
LIGHT
MEASURE / SOURCE
3W
mA+
+
V
Hz
–
Ω
4W
mA–
–
+
MEASURE / SOURCE
3W
mA+
+
V
Hz
–
Ω
4W
mA–
–
+
mA IN
-25.00%
MENU
0.000 mA
LIGHT