Martel Electronics PSC4010 - Manual (Page 3)

1
1. Introduction
The Martel PSC4010 Multifunction Process Calibrator is a handheld, battery-operated
instrument that measures and sources electrical and physical parameters. The calibrator has
the following features and functions:
• A graphics display. The display can be used to source and measure volts, current,
frequency, and to source pulse trains.
• Setpoints in each range for quickly increasing/decreasing output
• An interactive menu
• Complete serial interface for remote control
1.1 Customer Service
Corporate Office:
www.martelcorp.com
e-mail: [email protected]
Tel: (603) 434-1433 800-821-0023 Fax: (603) 434-1653
Martel Electronics
3 Corporate Park Dr.
Derry, NH 03038
1.2 Standard Equipment
Check to see if your calibrator is complete. It should include:
PSC4010 Calibrator, Instruction Manual, Test Leads, Rubber Boot, NIST Certificate