Martel Electronics DMC1400 - Manual (Page 8)

Figure 2. Keypad
Figure 2 shows the location of the keys on the calibrator. Table 2 lists the
functions of each key.
Table 2. Key Functions
No. Name Function
1 Function Keys F1, F2, F3 Used to operate the menu bar at the bottom
of the calibrator display. F1 is used for select-
ing options in the left box, F2 for the center
box, and F3 for the right box.
2 Home Returns to home menu on the menu bar.
3 Power Turns calibrator on and off.
4 Cursor Control Key Left and right arrow keys are used to select
which decade to be changed in output value.
Up and down arrow keys are used to
increase, decrease, or ramp output value.
5 Numeric Keypad Allows user to enter Numeric values.
2.1 Main Display
Figure 3. Display
6