NSi Industries DG280A-24 - Manual (Page 5)

3
Press MONTH, DATE, and YEAR key to advance to
the desired month, date and year, then press ENTER .
NOTE: The day of the week will automatically set
once the date is entered .
4.0 DAYLIGHT SAVING TIME
After setting or modifying the date, display will show:
a . For standard USA daylight savings (DSt), press
MODE and go to step 5 .0 .
b . For dates other than standard USA dates, press
MONTH and go to step 4 .1 .
c . If daylight saving time (DSt) is NOT required, press
DEL display will show:
Press ENTER then go to step 5 .0 .
4.1 TO MODIFY STANDARD USA DAYLIGHT SAV-
INGS DATES
NOTE: The first two digits represent the month and
the second set of digits represent the week in the
month . Choices for week are 01 (1st), 02 (2nd), 03
(3rd) or L (Last) week of the month . The default day