NSi Industries DZS400BP - Manual (Page 10)

channel to turn ON at sunset and then press
ENTER. Display will show:
NOTE: Sunset Time will be based on Date and
Latitude entered.
Press ENTER. The display will show:
If an offset to sunset time is required, press HOUR
and MIN. Offset can be set to 4 hours and 59 min-
utes max. Press EVENT to select + or – and then
press ENTER.
NOTE: A + sign will turn load ON that many hours
and/or minutes after sunset. A - sign will turn load
ON that many hours and/or minutes before sunset.
The display will show:
Press SELCT and then ENTER to activate sunrise
time.
NOTE: To turn load OFF at a preset OFF time,
leave this field bank. Press ENTER. The display
will show:
9
7.1 SETTING HOURS AND MINUTES
a. Press HOUR and MIN to set desired time.
b. Press EVENT to set desired event.
7.2 SETTING DAYS, HOLIDAY AND SEASONS
Press SELCT to select the flashing desired days,
holiday and/or seasons, otherwise press DAY to
skip and then press ENTER.
To delete entry, press DAY until previously select-
ed entry flashes, press SELCT and then press
ENTER. The display will show:
Follow the same procedures above to set more
schedule entries for channel 1. At the next blank
screen press SELCT to select desired channel and
proceed with the steps above to set more schedule
entries.
8.0 TO SET ASTRONOMIC SCHEDULE (FOR DZS
MODELS ONLY)
Press MODE until display shows:
Press SELCT to select channel 1 or 2. Press LAT
key to advance to the desired degree of latitude,
from 0° to 60° north or 0° to 60° south. Press
ENTER.
8.1 SELECTING ASTRO DAYS
Press S E L C T to select desired day s, holiday
and/or seasons in which you want the indicated
8
DTS400B - DZS400BP 3/9/07 10:19 AM Page 19