NSi Industries ELC72 - Manual (Page 13)

11
4.0 EVENT MODE
Up to 128 events can be programmed . Events can be
an ON, an OFF, dUR1(duration), dUR2, dUR3, dUR4,
CYC1 (duty cycle), CYC2, CYC3 or CYC4 . An event
can be assigned to any channel . Each event can be
assigned to any day or combination of days including
the 3 holiday schedules (A, B and C) .
Press the PROGRAM key to bypass and go to next
mode .
Press the NEXT key to go to the first setting .
4.1 SET EVENTS
Use the + and - keys to modify the flashing item .
Use the NEXT key advance to the next flashing item .
Choose the event number to program .
Choose the event type to change from NONE .
Choose the channel number .
Program hours and minutes for event .
For flashing day, use the + and - keys and show YES to
select day . Press the NEXT key to advance . Move
through all days and holiday A, B, and C .
Repeat for each event .
Press the PROGRAM key to go to next mode .
5.0 INPT MODE
Each input can be individually configured as a
retriggerable override, a toggle override, an enabler or
as one of four sensor types .