Pyromation Series 610 1_16 DIN - Manual (Page 107)

1 /
4
-DIN, 1 /
8
-DIN & 1 /
16
- DIN Controllers & Indicators - Product Manual
Parameter Legend
for 1 sec
followed
by
Set
Value
Adjustment Range &
Description
Default
Value When
Visible Units
Display
( 1 /
8
Din
Only)
Alarm 3 Type ' 
As for alarm 1 type
C C  Always 
Process High
Alarm 3 value* )? 
Range Min. to Range Max.
Parameter repeated in Setup Mode Range
Max. ' 
= ):$
Process Low
Alarm 3 value* )' 
Range Min. to Range Max.
Parameter repeated in Setup Mode
Range
Min. ' 
= ):' 

Alarm 3
Hysteresis* $4
1 LSD to 100% of span (in display units)
on “safe” side of alarm point.
Parameter repeated in Setup Mode
 ' 
is not
C C * 
Alarm 4 Type ' 
As for alarm 1 type
C C  Always 
Process High
Alarm 4 value* )? 
Range Min. to Range Max.
Parameter repeated in Setup Mode Range
Max. ' 
= ):$
Process Low
Alarm 4 value* )' 
Range Min. to Range Max.
Parameter repeated in Setup Mode
Range
Min. ' 
= ):' 

Alarm 4
Hysteresis* $4  ' 
is not
C C 4 
Alarm 5 Type '  C C  Always 
Process High
Alarm 5 value* Range Min. to Range Max.
Parameter repeated in Setup Mode
Range
Max. ' 
= ):$
Process Low
Alarm 5 value* )' 
Range Min. to Range Max.
Parameter repeated in Setup Mode
Range
Min. ' 
= ):' 

$4
1 LSD to 100% of span (in display units)
on “safe” side of alarm point.
Parameter repeated in Setup Mode
 ' 
is not
C C 5 
7C= Alarm 1, direct, non-latching
C+ Alarm 1, reverse, non-latching
7'=
Alarm 1, reverse, latching
C= Alarm 2, direct, non-latching
C+ Alarm 2, reverse, non-latching
'= Alarm 2, direct, latching
'+ Alarm 2, reverse, latching
C= Alarm 3, direct, non-latching
C+ Alarm 3, reverse, non-latching
'= Alarm 3, direct, latching
Output 1 Usage 0- 
'+ Alarm 3, reverse, latching
C=
when
@C
is not
linear
output
type,
+ /)
if
@C
is
linear
output
type
@C
is not
linear or
empty

1 LSD to 100% of span (in display units)
on “safe” side of alarm point.
Parameter repeated in Setup Mode
As for alarm 1 type
)? 
Alarm 5
Hysteresis*
Alarm 1, direct, latching
'+
Page 102
P6010 & P8010 Model Group 59305, Issue 6 – March 2006