Pyromation Series 610 1_16 DIN - Manual (Page 91)

1 /
4
-DIN, 1 /
8
-DIN & 1 /
16
- DIN Controllers & Indicators - Product Manual
Parameter Lower
Display
Upper
Display Description Default
Value
When
Visible



Decimal point
position =) -

Decimal point position in
non-temperature ranges.
0 = XXXX
1 = XXX.X
2 = XX.XX
3 = X.XXX
 %C@.
 =
mV, V or
mA

Process
Variable Offset ""-
±Span of controller (see CAUTION note
at end of section)
 Always
$ High Limit. Limit relay is
energised when process
“safe” (PV < Limit Setpoint) Limit Action 3.*'
'  Low Limit. Limit relay is
energised when process
“safe” (PV > Limit Setpoint)
$ Always
Setpoint Upper
Limit -)1' Current Setpoint value to Scale Range
Maximum Range
Max.
Always
Setpoint Lower
Limit -)'' Scale Range Minimum to current Setpoint
value Range
Min
Always
):$ Process High Alarm
):'  Process Low Alarm
= 
Deviation Alarm
 C= Band Alarm
Alarm 1Type ' 
C C  No alarm
):$ Always
Process High
Alarm 1 value* )? 
Range Min. to Range Max. Range
Max.
' =
):$
Process Low
Alarm 1 value* )' 
Range Min. to Range Max
Range
Min.
' =
):' 
Deviation
Alarm 1 Value* = '
±span from setpoint
 ' =
= 
Band Alarm 1
value*
 '
1 LSD to full span from setpoint.

' =
 C=
Alarm 1
Hysteresis*
$4
1 LSD to 100% of span (in display units)
on “safe” side of alarm point.

Always
Alarm 2 Type ' 
As for alarm 1 type
):'  Always
Process High
Alarm 2 value*
)? 
Range Min. to Range Max. Range
Max.
' =
):$
Process Low
Alarm 2 value* )'  Range
Min.
' =
):' 
= '
±span from setpoint.
 ' =
= 
Band Alarm 2
value*  '
1 LSD to full span from setpoint.
 '  =
 C= 
Range Min. to Range Max.
Deviation
Alarm 2 Value*
Page 86
P6700, P8700& P4700 Model Group 59305, Issue 6 – March 2006