Pyromation Series 610 1_16 DIN - Manual (Page 72)

1 /
4
-DIN, 1 /
8
-DIN & 1 /
16
- DIN Controllers & Indicators - Product Manual
Parameter Lower
Display
Upper
Display Description Default
Value
When
Visible
Process High
Alarm 1 value* )? 
Range Min. to Range Max.
Parameter repeated in Setup Mode Range
Max.
' =
):$
Process Low
Alarm 1 value*
)' 
Range Min. to Range Max
Parameter repeated in Setup Mode Range
Min.
' =
):' 
Deviation
Alarm 1 Value*
= '
±span from setpoint
Parameter repeated in Setup Mode

' =
= 
Band Alarm 1
value*  '
1 LSD to full span from setpoint.
Parameter repeated in Setup Mode

' =
 C=
Alarm 1
Hysteresis* $4
1 LSD to 100% of span (in display units)
on “safe” side of alarm point.
Parameter repeated in Setup Mode
 Always
Alarm 2 Type ' 
As for alarm 1 type
):'  Always
Process High
Alarm 2 value* )? 
Range Min. to Range Max.
Parameter repeated in Setup Mode Range
Max.
' =
):$
Process Low
Alarm 2 value* )' 
Range Min. to Range Max.
Parameter repeated in Setup Mode Range
Min.
' =
):' 
Deviation
Alarm 2 Value* = '
±span from setpoint.
Parameter repeated in Setup Mode
 ' =
= 
Band Alarm 2
value*  '
1 LSD to full span from setpoint.
Parameter repeated in Setup Mode
 '  =
 C= 
Alarm 2
Hysteresis*
$4
1 LSD to 100% of span (in display units)
on “safe” side of alarm point.
Parameter repeated in Setup Mode
 Always
Loop Alarm
Enable ' C =, (disabled) or
C  (enabled) =,  Always
C C! No alarms Inhibited
' 
Alarm 1 inhibited
'  Alarm 2 inhibited
Alarm Inhibit %C?
 /? Alarm 1 and alarm 2
inhibited
C C! Always
59305, Issue 6 – March 2006
P6170, P8170 & P4170 Model Group Page 67