Pyromation Series 610 1_16 DIN - Manual (Page 56)

1 /
4
-DIN, 1 /
8
-DIN & 1 /
16
- DIN Controllers & Indicators - Product Manual
Table 12. P6100, P8100 & P4100 Set Up Mode Parameters
Parameter Lower
Display
Upper Display
Adjustment Range
Default
Value
When
Visible
Input Filter Time
constant "'/ OFF, 0.5 to 100.0 secs in
0.5 sec increments

.

Always
Process Variable Offset
""-
±Span of controller

Always
Primary Power ))Ww The current Primary
Output Power. Read Only. N/A Always
Secondary Power -)Ww The current Secondary
Output power. Read Only. N/A 3/5@
=
=1 ' 
Primary Output
Proportional Band ):) 0.0% (ON/OFF control)
and 0.5% to 999.9% of
input span.

.

Always
Secondary Output
Proportional Band ):- 0.0% (ON/OFF control)
and 0.5% to 999.9% of
input span.

.
 3/5@ = =1 ' 
Automatic Reset
(Integral Time
Constant) +,/ 0.01 to 99.59 (1 sec to 99
mins 59 secs) and OFF

.
 ):)

is not
 .  
Rate (Derivative Time
Constant) + .  0.00 to 99.59 (OFF to 99
mins 59 secs)

.
 ):)

is not
 .  
Overlap/Deadband
'
-20% to +20% of the sum
of the Primary and
Secondary Proportional
Bands
 ):) 
is not 
.
 
Manual Reset (Bias)  - 0% to 100% (-100% to
100% if
3/5@ = =1 ' )
 ):) 
is not 
.
 
Primary Output
ON/OFF Differential
=") 0.1% to 10.0% of input
span (enter in % span)

.
 ):) = 
.
 
Secondary Output
ON/OFF Differential
="- 0.1% to 10.0% of input
span (enter in % span)
 .  ):-
=

.
 
Primary and Secondary
Output ON/OFF
Differential
="" 0.1% to 10.0% of input
span (enter in % span)

.

):) and ):-
=
 .  
Setpoint Upper Limit
-)1'
Current Setpoint value to
Scale Range Maximum Range
Max.
Always
Setpoint Lower limit
-)''
Scale Range Minimum to
current Setpoint value Range Min Always
Primary (Heat) Output
Upper Power Limit
)1'
0% to 100% of full power

):) 
is not
 .  
Output 1
Cycle Time 3. 0.5, 1, 2, 4, 8, 16, 32, 64,
128, 256 or 512 secs.
Not applicable to linear
outputs  0- 
=
)+

or -!N 
or
1,
59305, Issue 6 – March 2006
P6100, P6120, P8100 & P4100 Model Group Page 51