Revo RESPTZ37-1/HSC/HSW User Manual - Manual (Page 12)

REVO America www.revoamerica.com RESPTZ37-SERIES
10
NOTE
This is an important step. If you do not set the camera addresses correctly, there will be
communication errors.
Figure 4. Setting Camera Addresses
Setting Camera Protocol, Video Standard, Baud Rate and Parity
(Optional)
If you are using a REVO America keyboard controller and using the camera in the United States
or other NTSC standard country, there is no need to change the default settings of switches S4,
S5 and S6 (Figure 2). You can use the default settings.
If you need to make changes, see the setting options that follow. The switches are set as follows:
D OME ID S3 S2 S1
1 0 0 1
2 0 0 2
1
23 4
5
6
789
0
8
1
1
23 4
5
6
7 89
0
8
1
1
23 4
5
6
7 89
0
8
1
S3
S2
S1