Revo RESPTZ37-1/HSC/HSW User Manual - Manual (Page 45)

REVO America www.revoamerica.com RESPTZ37-SERIES
43
Shutter Limit setting. As a result, video may appear blurred or choppy in extreme low-light
situations. This setting does not affect camera operation in normal lighting situations.
Pattern
A series of pan, tilt, zoom and focus movements. Up to 4 Patterns may be programmed for the
dome camera.
Preset
Programmed video scene, based on a specific pan, tilt, zoom, and focus settings. Up to 120
Presets may be programmed for the dome camera.
Privacy Zone
Masked areas of the dome camera's viewing area. These masks prevent operators of the
surveillance system from viewing these designated zones. The Privacy Zones move in relation to
the dome camera’s pan/tilt position. In addition, the apparent size of the Privacy Zone adjusts
automatically as the lens zooms in or out. Up to 4 Privacy Zones may be established.
Vector Scan
Allows the camera to move from start point to end point including tilt and zoom simultaneously and
linearly.
White Balance
Adjusts in the color hue (red and blue) gain for a camera so that true white appears white in the
image. It is normally compensated for by the automatic gain control. In some lighting conditions,
you may need to manually adjust the red and blue settings for optimal viewing. When Automatic
White Balance is enabled, the camera measures the image and automatically adjusts the red and
blue settings to balance white. When Automatic White Balance is disabled, the camera uses the
values set for the red and blue settings to balance white.