Installation, Considerations, Tools required – Revo RESPTZ37-1/HSC/HSW User Manual User Manual
Page 16: Considerations tools required
REVO America
www.revoamerica.com
RESPTZ37-SERIES
14
I
I
n
n
s
s
t
t
a
a
l
l
l
l
a
a
t
t
i
i
o
o
n
n
Considerations
You should carefully consider installation of the camera(s) to ensure a successful and easy
installation. The camera may be used indoors or outdoors (with outdoor housing), but there are
conditions that should be avoided to ensure high-quality video and avoid damage to the cameras.
Please review the following list prior to starting your installation.
• Camera Location – Cameras should be located in places where they will be protected from
direct exposure to the sun, strong light or water immersion. Exposure to any of these will
impair video quality and damage the camera.
• Wiring – The cameras are connected to the video system using coaxial cable. They require
power from a Class 2 power supply and if you choose to connect alarms or sensors, other
wiring. Make sure that you can provide the wiring to the locations that you select, and that
power is available for the power supply. Contact REVO America for all the accessories that
you will need to install the camera.
• Visibility – The cameras should be mounted so there are no obstructions or blind spots.
• Mounting – The camera should be mounted in a sturdy location capable of supporting its
weight (see specifications for your model).
TIP
If this is your first time installing a video system, you may want to connect all of the
cameras and other devices to the DVR prior to installing and mounting the equipment.
This will give you the opportunity to wire the system and ensure you have everything
connected properly before you mount the cameras and run the wiring.
Tools Required
There are no special tools required to install the camera. Standard flat and Philips head screw
drivers, a power drill and power saw may be required to create access for the wiring required for
the camera.