Troubleshooting – Revo RESPTZ37-1/HSC/HSW User Manual User Manual
Page 41
REVO America
www.revoamerica.com
RESPTZ37-SERIES
39
Power Consumption:
20 W maximum
Alarm Outputs:
4 relays 24 VDC, 1A Max. (selectable NC/NO)
Alarm Inputs:
8 dry contact (selectable NC/NO)
Weight:
Approx. 1.2 kg
Operating temperature:
32
° to 122° F (0° to 50° C)
Operating humidity:
0 to 90% relative, non-condensing
Storage temperature:
4
° to 140° F (-20° to 60° C)
Specifications are subject to change without notice.
T
T
r
r
o
o
u
u
b
b
l
l
e
e
s
s
h
h
o
o
o
o
t
t
i
i
n
n
g
g
Prior to calling product support, verify the installation of the camera as described in this manual. If
everything is connected correctly, check the following:
Problem
Possible Solution
No video
• Verify that power is connected to all pieces
of equipment in the system.
• Verify that the power switches are in the
ON position.
• Check the video connections.
• Check video cable.
Poor video quality
• Check that the BNC connectors are
inserted properly.
• Check the voltage level of the dome
camera.
• Cable for video is shielded.
Dome cameras lose their
positions
• Reset the cameras using the Dome Setup
menu.
• Check that the dome camera is inserted
properly in the base.
• Check the voltage level of the camera.
Camera number does not match
the multiplexer number.
• If using a multiplexer. Check the camera ID
and insert the BNC cable into the proper
input of the multiplexer.