Revo RESPTZ37-1/HSC/HSW User Manual - Manual (Page 35)

REVO America www.revoamerica.com RESPTZ37-SERIES
33
ERASE PROGRAMMED DATA
AUTO SCAN : ON
PRESET : ON
TOUR : ON
PATTERN : ON
ALARM : ON
AREA TITLE : ON
PRIVACY ZONE : ON
CAMERA : ON
DOME SETUP : ON
ERASE
SAVE AND EXIT(ESC TO CANCEL)
PRESET FOCUS DEFAULT Selecting the Preset Focus Default submenu allows you to
select the default focus mode of the camera. The choices are:
AUTO/MANUAL/ONE PUSH.
PRESET FOCUS DEFAULT
FOCUS : AUTO
SAVE AND EXIT(ESC TO CANCEL)
ORIGIN OFFSET This feature is used to align a new dome camera to exactly the same
position as the previously installed camera. Note that the Initialize Data
and Dome Reset functions will not override the Origin Offset values. If
you want to change the offset value that you have set, you can do it
using this menu.