SHIMPO 921A User Manual
Page 29
Advertising
TRICOR Systems Inc.
6.2
Remove the back panel (Refer to Appendix C Warnings and
Step 1) prior to removing panel. Check the 4-A fuse (see
Figure 5.1) on the power supply CCA (located on the right side
of the base beneath the operator's display) .
Replace defective fuse, if any, with proper type. Reapply
power. If fuse blows or unit still does not operate properly,
return it to TRICOR for service.
4-A
Fuse
Figure 5.1 4A Fuse Location on Power Supply CCA
2-204-20
Advertising