Thermo Fisher Scientific CyberScan PC 300 - Manual (Page 36)

Instruction Manual PC 300
32
SETUP in Conductivity Measurement Mode
P5.0: View previous calibration data
P5.1 First range calibration point (0.00 – 19.99 μS)
P5.2 Second range calibration point (0.0 – 199.9
μS)
P5.3 Third range calibration point (0 – 1999 μS)
P5.4 Fourth range calibration point (0.00 – 19.99 mS)
P5.5 Fifth range calibration point (0.0 – 199.9 mS)
Instructions in Section 7.6.
P6.0: View electrode data
P6.1 Effective cell constant for first range
(0.00 – 19.99 μS)
P6.2 Effective cell constant for second range
(0.0 – 199.9
μS)
P6.3 Effective cell constant for third range (0 – 1999 μS)
P6.4 Effective cell constant for fourth range
(0.00 – 19.99 mS)
P6.5 Effective cell constant for fifth range
(0.0 – 199.9 mS)
Instructions in Section 7.7.
P7.0: Unit configuration
P7.1 READY indicator and auto endpoint function –
select on or off
P7.2 Select °C or °F
P7.3 Select Automatic or Manual Temperature
Compensation
P7.4 Setting TDS conversion factor
Instructions in Section 7.8.
P8.0: Temperature
P8.1 Adjusting temperature coefficient
P8.2 Adjusting normalization temperature
Instructions in Section 7.9.
P9.0: Reset to factory defaults
P9.0 Reset meter to factory defaults
Instructions in Section 7.9.1.