Thermo Fisher Scientific CyberScan PC 300 User Manual
Page 6
Instruction Manual PC 300
2
2
D I S P L AY A N D K E Y PA D F U N C T I O N S
2.1 Display
The LCD has a primary and secondary display.
•
The primary display shows the measured pH, conductivity or TDS.
•
The secondary display shows the measured temperature.
The display also shows error messages, keypad functions and program functions.
See Figure 2.
Figure 2: Full LCD Screen
1. SETup mode indicator
8. micro-siemens indicator
15. Low battery indicator
2. MEASurement mode
indicator
9. parts per thousand indicator
16. Probe indicator
3. CALibration indicator
10. parts per million indicator
17. Calibration solution
indicator
4. mV indicator
11. Temperature indicator
18. Cell constant indicator
5. % indicator
12. pH indicator
19. ON / OFF indicator
6. pH measurement indicator
13. Automatic Temperature
Compensation indicator
20. HOLD indicator
7. milli-Siemens indicator
14. ERRor indicator
21. READY indicator