Thermo Fisher Scientific CyberScan pH/Ion 510 - Manual (Page 20)

Instruction Manual pH 510/ Ion 510
- 16 -
Memory Recall
1. In the measurement mode, press MR key once to retrieve the last
reading stored. The memory location screen – “MEM”, “LOC” and
the memory number – will flash on the display.
2. Press the ENTER key to recall the reading stored under that memory
number.
3. If necessary, you can selectively choose to view any data that is
stored by using ¿ or À key. For example to view the third data
location set to LOC 3 from last stored location of LOC 5. Use ¿ or À
key to set to LOC 3. Press ENTER key to retrieve the data from this
location.
4. To continue reviewing additional stored data, press ENTER key
again. For this instance the next location, LOC 2, will be displayed.
5. To exit Memory Recall and operate meter, press the MEAS key to
return to the measurement mode.
NOTE: Readings stored in memory are retained even of the unit is turned
off. To erase all readings stored in memory, see Program P1.0 on the
next page.