West Control Solutions Pro-16 - Manual (Page 10)

Operation
9499-040-93811 / 59537-1 Page 10 of 88 Pro-16
The setting in the function level or in BlueControl® (engineering tool), individual layers can
be locked or made accessible by entering the password in.
Individual parameters accessible without password must be copied to the extended
operating level via BlueControl
® .
When supplied, all levels are fully accessible,
Password
PASS = OFF
3.2.1 Operating Level

See also chapter 3.4 Operating level

And chapter 3.6 Function level
3.3 Behaviour after power-on
After supply voltage switch-on, the unit starts with the operating level.
The unit is in the condition which was active before power-off.
If the controller was in manual mode before power-off, the controller starts with the last
correcting value after switching on again.