West Control Solutions Pro-16 - Manual (Page 77)

Special
functions
9499-040-93811 / 59537-1 Page 77 of 88 Pro-16
9.5.3 Starting the timer
Dependent of configuration, the timer start is as follows:

by a positive activation at one of digital inputs di1..3

by switching on the manual mode via è - key

by switching on the controller (power On)

by changing the timer run-time t.ti > 0 (extended operating level)

via the serial interface

Display:
run-LED Signification
blinks
 timer was started
 timer is not running yet
lit  timer was started
 timer is running
off  timer is off
( End and setpoint are  timer has elapsed
displayed alternately)
 deletion of
End display by
pressing any key
g
With active timer, the time can be adjusted by changing parameter t.ti at extended
operating level.